23 product(s) found for "Cylinder barrels"
Husqvarna 360 cylinder 1610410-01
Husqvarna recondtioned cylinder with new liner size 81.42, we have original mahle pistons to fit this, part number 1610410-01 to fit all 360 gp cr and wr 1975 to 1977. Library photo.
£315.00
Husqvarna 250 cylinder 1974 to 1977 1610354-01
Husqvarna 250 reconditioned cylinder, with new liner, size 69.43, part number 1610354-01, to fit 1974 to 1977, will require 2 head bolt holes milling to fit 75/76/77.
£300.00
Husqvarna 250 cylinder and head 1970 to 1974
Husqvarna good used 250 cylinder, piston with new ring, clips shims pin and bearing, and head, should fit 1969 to 1974 non reed, bore size 69.93, study photos.
£225.00
Husqvarna 250 used cylinder 1610354-01 1974 to 1977
Husqvarna used 250 cylinder part number 1610354-01 size 69.50 standard bore will need a rebore, pistons available in piston kits, fits 1974 to 1977.
£200.00
Husqvarna used 125 cylinder, head and piston
Husqvarna 125 used cylinder, cylinder head and piston size 55.50 complete with ring pin small end bearing shims and clips, from 1982.
£200.00
Husqvarna used 390 cylinder 1611590-01
Husqvarna used cylinder to fit 1977 to 1979 wr and cr 390 engine number 2061 xxxx bore size 83.00 mm. Library photo.
£200.00
Husqvarna used 390 cylinder 1611829-01
Husqvarna used cylinder 1980 390, part number 1611829-01, bore size 83.00mm will need a rebore.
£200.00
Husqvarna used 250 cylinder 1978 to 1979
Husqvarna used 250 cylinder part number 1611658-03, 1978 to 1979.
£150.00
Husqvarna 1986 240 cylinder 1614496-02
Husqvarna 1986 used 240 cylinder part number 1614496-02, bore size 69.40 minor scores will clean out on rebore.
£125.00
Husqvarna 250 cylinder 1988 1616391-01
Husqvarna used cylinder and head water cooled 250 1988 with power valve part number 1616391-01, bore size 66.30mm
£125.00
Husqvarna used 125 cylinder and head 1614525
Husqvarna used 125 water cooled cylinder and head part number 1614525-01-03, bore size 55mm. 1984 to 1985.
£125.00
Husqvarna used cylinder and head 250 1614496-01
Husqvarna used cylinder and head part number on cylinder 1614496-01, bore size 70.00mm
£125.00
Husqvarna 1969 to 1971 250 cylinder head
Husqvarna used cylinder head to fit 1969 to 1971, has 2 spark plug holes.
£100.00
Husqvarna 1980 390/420 cylinder head
Husqvarna used cylinder head to fit 1980 to 1982 390/420 + automatic, part number 1611751-01
£60.00
Husqvarna 430 cylinder head 1611694-01
Husqvarna used cylinder head, part number 1611694-01 to fit 1981 to 1983
£60.00
Husqvarna cylinder head 390 1977 to 1979 1611596-01
Husqvarna used cylinder head 1977 to 1979 390 part number 1611596-01
£60.00
Husqvarna 1982 to 1984 head 1611850-01
Husqvarna 1982 to 1984 240/250 used cylinder head, part number 1611850-01. Library photo.
£50.00
Husqvarna 1984 500 cylinder head
Husqvarna 500 used cylinder head, to fit 1984. Some marks. Library photo.
£50.00
Husqvarna 1972 to 1975 250 cylinder studs 1610914-01
Husqvarna cylinder stud 1972 to 1975 250 cr/wr, part number 1610914-01, 165 x 10 mm. Library photo.
£5.00
Husqvarna cylinder stud 1611710-01
Husqvarna cylinder stud part number 1611710-01, and 1611694-01, 195x10mm, to fit 1981 to 1982 430.
£5.00
Husqvarna cylinder stud 1611883-01
Husqvarna cylinder stud part number 1611883-01, M10 x 190mm long
£4.00
