37 product(s) found for "Clutch"

Husqvarna clutch support shim used condition, part number 1611155-01, fits all years and models. Library photo.

Husqvarna good used clutch ring, part number 1611149-02 bolts solid to clutch gear wheel. Used part and may have some imperfections but fully functionable.

Husqvarna nos new old stock clutch trust bearing part number 1611166-01.

Husqvarna nos new old stock clutch needle roller bearing part number 1611671-01.

Husqvarna nos new old stock thick bottom clutch plain plate part number 1612945-01 to fit 1966 to 1971 also 1974 mag engine 250.

Husqvarna clutch gear lock washer part number 1611995-01

Husqvarna nos new old stock clutch hub stud, part number 1225380-01, to fit 1966 to 1971, also 1974 250 mag reed valve engine.

Husqvarna used clutch basket and gear, to fit 1977 to 1979 390. 68 teeth.

Husqvarna used clutch basket and gear none cush drive, to fit 1980 to 1981 125/250/390/420, 68 teeth. Part numbers gear 1611179-01, ring/basket 1611149-01.

Husqvarna clutch plate kit part number 1611108-01 = 5 plain plates, 1611109-01 = 5 plates with lining, to fit 250/360/400/450/460 1972 to 1975. LIBRARY PHOTO

Husqvarna Cagiva clutch plate kit part number 800083413, 6 plain plates and 7 friction plates.

Husqvarna used clutch push rod to fit all 1966 to 1975

Husqvarna used clutch spring top hat nut, part number 1611114-01,fits all 1972 to 1975 priced each, clutch requires 8.

Husqvarna clutch steel plain plate, part number 1611158-01 to fit 1975 to 1984 stack height 1.5mm, also available in kit form 69.50. 125/250/360/390/400/420/430/500

Husqvarna clutch friction plate part number 1611157-01 to fit 1975 to 1984 stack height 3.5mm. Also available in kit form 69.50. 125/250/360/390/400/420/430/500

Husqvarna nos new old stock clutch spring part number 1611112-01 to fit 1972 to 1975. Priced each.

Husqvarna clutch hub part number 1519017-01. Library photo.

Husqvarna used clutch actuator arm part number 1611663-01, library photo.

Husqvarna used clutch hub 1966 to 71 and mag 250 part number 1611960-01

Husqvarna used clutch pressure plate 1966 to 71 and mag 250, part number 1611954-01

Husqvarna used gear and clutch stop screw part number 1225077-01

Husqvarna engine clutch lever part number 1610623-01

Husqvarna used engine clutch lever part number 1611171-01. Library photo.

Husqvarna engine clutch lever part number 1614584-01

Husqvarna nos new clutch actuation shaft part number1610774-01

Husqvarna nos new clutch gear part number 1611148-01

Husqvarna good used clutch hub 1984 to 1987, part number 1615088-01

Husqvarna nos new old stock clutch gear part number 1614402-01

Husqvarna clutch case cover, used, part number 1611486-01, to fit 1975 to 1981 250/360/390/420 Library photo.

Husqvarna nos rubber clutch dampers part number 1611152-01 to fit 1975 to 1981 priced each.

Husqvarna clutch plate kit part number 1611967-01 = 5 plain plates, 1611965-01 = 5 plates with lining, to fit all 4 speed 1966 to 1971, and 1974 250 cr.

Husqvarna used clutch hub part number 1611105-01.

Husqvarna new old stock clutch pressure plate, part number 1611111-01.

Husqvarna used clutch hub, part number 1611156-01, 1975 to 1985.

Husqvarna used clutch pressure plate, part number 1611168-01, 1975 to 1985.

Husqvarna used clutch basket and gear, used part, to fit 1975 to 1977 25/360, 70 teeth. Library photo.

Husqvarna clutch plate kit to fit 1975 to 1984 6 friction plates, and 5 plain plates. Part numbers 1611157-01 and 1611158-01. Stack height 28.5mm. 125/250/360/390/400/420/430/500