26 product(s) found for "Crankshaft"

Husqvarna very good used connecting rod kit, part number 1610642-01, this kit will fit 1967 to 1980 360/390/400/420, also 250 1972 to 1981.

Husqvarna 28 ball double row main bearing fits all 250/360/390/400/430/500 from 1966 to 1989.

Husqvarna 28 ball double row main bearing fits all 125 from 1972 to 1989.

Husqvarna 125 crank primary drive nut part number 1611175-01

Husqvarna new connecting rod kit with silver bearing and pin, part numbers 1610925-01 and 1610641-01, to fit 1966 to 1972, length centre eye to eye 120mm.

Husqvarna nos new old stock 125 rod kit part number 1610383-01

Husqvarna used flywheel/sprocket left hand thread nut part number 1610995-01

Husqvarna flywheel left hand thread nut part number 1611191-01/02/03 1981 onward.

Husqvarna woodruff ignition flywheel key part number 1513713-01 fits all.

Husqvarna right side viton crankshaft oil seal part numbers 1513725-01, 2965444-01 fits all except 125. Fits behind electrics

Husqvarna left hand side viton crankshaft oil seal part number 1513726-01, 2965549-14, fits all except 125 1976 to 1988, size 30x52x7.

Husqvarna left hand side viton crankshaft oil seal part number 2965514-14, fits all except 125 1966 to 1975, size 28x52x7.

Husqvarna very good used left hand crank shaft part number 1610654-01. Library photo.

Husqvarna replacement small end bearing fits all except 125 and 450, upto 1980, 1981 to 1988 250. Part number 1610933-01

Husqvarna crank shaft large taper femsa/motoplat part number 1610868-01, also 1611815-01 Library photo

Husqvarna crank gear lock washer part number 1225046-01

Husqvarna nos new old stock right side crankshaft shim part number 1610921-01.

Husqvarna crankshaft drive side nut part number 2511387-01, 1966 to 1971

Husqvarna used crankshaft drive stub part number 1611543-01, 1975 to 1981

Husqvarna used crank stub minor thread damage still ok to use, part number 1610632-01, 1972 to 1975

Husqvarna nos new drive gear nut part number 1611101-01

Husqvarna reproduction rod kit with big end bearing and new pin part number 1610773-01, 125mm centers, fits 250 upto 1977.. Library photo.

Husqvarna connecting rod kit, quality reproduction with new silver roller cage bearing, part number 1619825-01. 58mm crank pin, silver caged needle bearing to fit 250/400/420/430 1982 onwards and 1980 to 1982 420 automatic. Library photo.

Husqvarna connecting rod kit, quality reproduction, part number 1610642-01, 52mm crank pin, big end bearing. IN STOCK. Library photo.

Husqvarna left side crankshaft part number 1611660-01 fits 1981 to 1988 has cut away for w/c engine

Husqvarna good used right hand crankshaft part number 1611659-01. Library photo.