49 product(s) found for "Gearbox"

Husqvarna NOS new old stock gear selector drum, part number 1612371-01 to fit 500 4 speed 1983 to 1985

Husqvarna used condition oil filler cap in black, part number 1610786-01, vented type, to fit 1975 to 1981

Husqvarna used condition oil filler cap in blue part number 1610786-01 vented type to fit 1975 to 1981.

Husqvarna used condition oil filler cap, part number 1610786-02 in black non vented type, to fit 1981 to 1988.

Husqvarna used condition oil filler cap in blue, part number 1610786-02 non vented type to fit 1981 to 1988.

Husqvarna good used gear return spring part number 1612999-01

Husqvarna very good used ratchet segment part number 1612918-01 to fit 4 speed 1966 to 1971.

Husqvarna gear return spring part number 1612594-01.

Husqvarna used gear guide roller part number 1612424-01. Priced each

Husqvarna nos new old stock gear stricker part number 1612914-01 to fit 1966 to 1971.

Husqvarna nos new old stock output 4th gear support shim washer, part number 1612993-01, to fit 1968 to 1971. Priced each.

Husqvarna good used gear shaft seal flange behind drive sprocket part number 1610938-01 to fit 1969 to 1979.

Husqvarna used gear change return spring, part number 1612869-01

Husqvarna used condition auxiliary shaft to fit 1972 125/250/360/400/460 part number 1612841-01 tappered sprocket type. Library photo

Husqvarna used gear lever shaft part number 1610594-01, to fit 1972 to 1974

Husqvarna good used drain plug part number 1612537-01

Husqvarna gearbox bearing set to fit 1980 to 1988 250/390/400/420/430/500

Husqvarna gearbox bearing set to fit 1972 to 1979 250/360/390/400/460.

Husqvarna gearbox bearing set to fit 1966 to 1971 250/360/400

Husqvarna gearbox filler/breather plug used part, part number 1225625-01. Library photo

Husqvarna good used gear selector part number 1612844-01 generic photo.

Husqvarna right side viton gearbox oil seal part numbers 2965444-01 fits all 1973 to 1979. Fits behind final drive sprocket

Husqvarna gearbox bearing part number 2931240-04, fits all upto and including 1979. Fits behind final drive sprocket on sprocket shaft.

Husqvarna gearbox bearing part number 7382302-40 fits all from 1980 to 1988. Fits clutch shaft.

Husqvarna gearbox bearing part number 2931180-04, fits all upto 1979. Fits clutch shaft.

Husqvarna replacement counter shaft drive side sealed gearbox bearing to fit 1980 to 1988, part number 7382205-28.

Husqvarna quality gearbox bearing grooved with clip, part number 2931265-57. Fits all on clutch shaft.

Husqvarna quality replacement gearbox bearing grooved with clip, part number 2931220-57. Fits all on sprocket shaft.

Husqvarna nos folding gear lever pin and spring. Part number 1612686-01 and 1612687-01

Husqvarna nos new gear lever return spring part number 1612494-01

Husqvarna nos new gear lever shaft part number 1611746-01, 1981 on

Husqvarna nos new gear selector drum part number 1612486-01 fits all 1976 to 1983 6 speed

Husqvarna used gear selector part number 1612384-01 fits all 1982 to 1989, not 125

Husqvarna good used gear selector part number 1612848-01, generic photo.

Husqvarna nos new gear selector part number 1612896-01

Husqvarna gearbox output shaft bearing part number 1610848-01 and 1225512-01 fits all 4 speed 1966 to 1971. NOTE ROLLER BEARING ONLY, NO SHELL.

Husqvarna used gear linkage, part number 1611466-01, and 1611535-01,1975 to 1981. Library photo.

Husqvarna gearbox mainshaft, new old stock, part number 1612697-01.

Husqvarna new old stock gearbox mainshaft, part number 1612368-01.

Husqvarna new old stock mainshaft, part number 1612477-01. 15 teeth.

Husqvarna good used gearbox mainshaft part number 1612458-01.

Husqvarna used gearbox mainshaft, part number 1612840-01, to fit 1972 up cr250 has 19 teeth.

Husqvarna gearbox shaft part number 1612875-01 new old stock.

Husqvarna gearbox auxilary shaft part number 1612350-01, used condition.

Husqvarna used gearbox auxilary shaft, part number 1612369-01.

Husqvarna gearbox auxilary shaft used part, part number 1612473-01. Library photo

Husqvarna good used auxilary shaft part number 1612470-01. Library photo.

Husqvarna gear lever return spring, part number 1611692-01, fits 1981 to 1988.

Husqvarna high quality reproduction gear shift rubber, fit all 1966 to 1980, hole in 1 end type.